WELDSUCCESS AUTOMATION EQUIPMENT (WUXI) CO., LTD
Wuxi WeldSuccess Automation Equipment CO., LTD WhatsApp : 0086 15261660915 Email: info@weldsuccess.com
Add to Cart
Oval Tank Turning Rotator , Chain Tilting Machine For I Beam , Oval Tank , ±360° Tilting Angle
Brife info
1. Voltage : 380V 50Hz 3P / As per requirement if needed
2. Capacity : According to your work piece weight desigh
3. Lifting stroke : non-standard equipments , so we can design according to your requirement.
4. Delivery time : 20 days
5. Original country : China
Equipment usage
1. This machine is designed to change position of heavy products by flipping when welding. It provide higher efficiency and safer work area.
2. Widely used on I beam tilting , oval tank turning , etc..
3. If possible, please advise us your work piece picture or drawings for better quotation.
Detail introduction
1. The flipping tires work on turning products in 360 degree so as to adjust the position of the product.The equipment structure is like upside down gantry type. It has four reducer to control the product piece and
very convenient to apply when flipping.
2. The flipping tires are consist of swing arm, pillar and reset device, electric control and operating
system. It also includes four standing columns attached with driving mechanism on each top. The brake
motor controls the cycloidal pinwheel reducer to drive the sprockets.
3. The chain wheel is equipped with two pulley, the pulley installed on the swing arm.On the role of the
pulley is change the movement direction of the chain and chain extension. There is a guide wheel close to the bottom of the chain wheel , that use for increasing the angle on the sprocket chain.
4. By using the post box welded structure, with enough stiffness and strength, the four standing columns
are capable of using a long period with outstanding stability.
5. There are a swing arm and a heavy hammer device on the standing columns. When the work piece
need to flip, the swing arm goes downward with a certain angle. If there is no need to flip over the work
piece, the swing arm is raised, and the chain is loosen, to make the work piece either delivered neatly.
6. The flipping tires have lifting chain to rotate the work piece, so as to solve the problem of work piece
turn slippy. There are four reducers can turn direction, either same-directional or reverse rotation.
Same-directional rotation is to flip artifact,and reverse rotation is to lift artifacts.
7. To reach the length requirement of work pieces, one side standing columns are designed fixed while
the other side of two columns respectively equipped with a sliding seat. Please fix both sides before use.
8. Control system includes: main control cabinet hand control box, hand control box with 15 meters cable connected to the control cabinet, hand control box can be used in different location of the equipment to operate equipment.
9. The manual operation box and master ark with buttons, such as power up, stop, reverse direction
selector switch and abrupt stop button.
10. Control system has motor over-current, over-voltage and over torque protection.
11. Control system is equipped with temperature detection device, stop and alarm when over-temperature.
12. Control system has simple and convenient operation, reliable operation. The operation can be close to control or remote control operation, and it is convenient to the operator at any location.
Technical Parameters
| Model | LF-50 |
| Load Capacity | 5T |
| Left-right Column Center Distance | 2500mm |
| Front-back Column Center Distance | (Depends on work piece length) |
| Flipping Machine Motor Power | 1.5kw×4 |
| Chain model | 24B heavy duty |
| Flipping Angle | ±360° |
| Lifting Speed | 1500mm/min(const-speed) |
| Input Voltage | 3PH 380V/50Hz |
Information Provided
1. Equipment Electrical Data (Schematic diagram, wiring diagram) 1copy/set
2. Equipment Manual Instruction 1copy/set
3. certification 1copy/set
4. Shipping List 1copy/set
Quality Assurance and After-sales Service
1. Equipment installation and debugging is responsible by the supplier;Debugging tools, and personnel
required for coordination between the two parties to solve, installed base by the supplier to provide the
drawings, the buyer production.
2. The supplier can assist the buyer's operating personnel training.
3.The seller to the buyer service commitments: host warranty for a year, to provide door to door service,
warranty service according to the buyer's notification action within 24 hours, the buyer to assist.
4. Lifelong provide maintenance services and spare parts supply, after the warranty cost for wiring.
If you have any other special request,please just write me emial for discussion.